| A184 |
Standard Specification for Fabricated Deformed
Steel Bar Mats for Concrete Reinforcement |
|
| A370 |
Standard Test Methods and Definitions for Mechanical
Testing of Steel Products |
|
| A467 |
Standard Specification for Machine and Coil Chain |
|
| C36 |
Standard Specification for Gypsum
Wallboard |
|
| C158 |
Standard Test Methods for Strength of Glass by
Flexure (Determination of Modulus of Rupture) |
|
| C165 |
Test Methods for Measuring Compressive Properties
of Thermal Insulations |
|
| C271 |
Standard Test Methods for Density of Sandwich Core
Materials |
|
| C272 |
Standard Test Method for Water Absorption of Core
Materials for Structural Sandwich Construction |
|
| C273 |
Standard Test Methods for Shear Properties in Flat
wise Plane of Flat Sandwich Construction or Sandwich
Cores |
|
| C282 |
Standard Test Methods for Acid Resistance of Porcelain
Enamels (Citric Acid Spot Test) |
|
| C297 |
Standard Test Methods for Flatwise Tensile Strength
of Sandwich Constructions |
|
| C363 |
Test Methods for Delamination Strength of Honeycomb
Type Core Material |
|
| C364 |
Test Methods for Edgewise Compressive Strength
of Sandwich Cores |
|
| C365 |
Standard Test Methods for Flatwise Compressive
Properties of Sandwich Cores |
|
| C393 |
Standard Test Methods for Flexural Properties of
Sandwich Constructions |
|
| C473 |
Standard Test Methods for Physical Testing of Gypsum
Board Products and Gypsum Lath |
|
| C514 |
Standard Specification for Nails for the Application
of Gypsum Board |
|
| C557 |
Standard Specification for Adhesives for Fastening
Gypsum to Wood Framing |
|
| C630 |
Standard Specification for Water-Resistant Gypsum
Backing Board |
|
| C645 |
Standard Specification for Non-Load (Axial) Bearing
Steel Studs, Runners (Track), and Rigid Furring Channels
for Screw Application of Gypsum Board |
|
| C931 |
Standard Specification for Exterior Gypsum Soffit
Board |
|
| C947 |
Standard Test Methods for Flexural Properties of
Thin-Section Glass-Fiber-Reinforced Concrete (Using
Simple Beam With Third-Point-Loading) |
|
| C955 |
Load-Bearing (Transverse and Axial) Steel Studs,
Runners (Tracks), and Bracing or Bridging for Screw
Application of Gypsum Board and Metal Plaster Bases |
|
| C960 |
Standard Specification for Predecorated Gypsum
Board |
|
| C1177 |
Standard Specification for Glass Mat Gypsum Substrate
for Use as Sheathing |
|
|
|
| C1178 |
Standard Specification for Glass Mat Water-Resistant
Gypsum Backing Panel |
|
|
|
| C1278 |
Standard Specification for Fiber-Reinforced Gypsum
Panels |
|
|
|
| C1395 |
Specification for Gypsum Ceiling Board |
|
| D412 |
Standard Test Methods for Vulcanized Rubber and
Thermoplastic Rubbers and Thermoplastic Elastomers |
|
| D570 |
Standard Test Methods for Water Absorption of Plastics |
|
| D573 |
Standard Test Methods for Rubber--Deterioration
in an Air Oven |
|
| D624 |
Standard Test Methods for Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic Elastomers |
|
| D638 |
Standard Test Methods for the Tensile Properties
of Plastics |
|
| D648 |
Standard Test Methods for Deflection Temperature
of Plastics Under Flexural Load in the Edgewise Position |
|
| D695 |
Standard Test Methods for Compressive Properties
of Rigid Plastics |
|
| D696 |
Standard Test Methods for Coefficient of Linear
Thermal Expansion of Plastics Between -30 deg. C
and 30 deg. with a Vitreous Silica Dilatometer |
|
| D572 |
Standard Test Methods for Rubber-Deterioration
by Heat and Oxygen |
|
| D781 |
Standard Test Methods for Puncture and Stiffness
of Paperboard, and Corrugated and Solid Fiberboard |
|
| D790 |
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials |
|
| D792 |
Standard Test Methods for Density and Specific
Gravity (Relative Density) of Plastics by Displacement |
|
| D828 |
Standard Test Methods for Tensile Breaking Strength
of Paper and Paperboard |
|
| D882 |
Standard Test Methods for Tensile Properties of
Thin Plastic Sheeting |
|
| D903 |
Standard Test Methods for Peel or Stripping Strength
of Adhesive Bonds |
|
| D905 |
Standard Test Methods for Strength Properties of
Adhesive Bonds in Shear by Compression Loading |
|
| D1002 |
Standard Test Methods for Apparent Shear Strength
of Single-Lap-Joint Adhesively Bonded Metal |
|
| D1037 |
Standard Test Methods for Evaluating Properties
of Wood-Base Fiber and Particle Panel Materials |
|
| D1084 |
Standard Test Methods for Viscosity of Adhesives |
|
| D1101 |
Standard Test Methods for Integrity of Adhesive
Joints in Structural Laminated Wood Products for
Exterior Use |
|
| D1583 |
Standard Test Methods for Hydrogen Ion Concentration
of Dry Adhesive Films |
|
| D1621 |
Standard Test Methods for Compressive Properties
of Rigid Cellular Plastics |
|
| D1622 |
Standard Test Methods for Apparent Density of Rigid
Cellular Plastics |
|
| D1623 |
Standard Test Methods for Tensile and Tensile Adhesion
Properties of Cellular Plastics |
|
| D1761 |
Standard Test Methods for Mechanical Fasteners
in Wood |
|
| D1876 |
Standard Test Methods for Peel Resistance of Adhesives (T-Peel Test) |
|
| D2240 |
Standard Test Methods for Rubber Property--Durometer
Hardness |
|
| D2294 |
Standard Test Methods for Creep Properties of Adhesives
in Shear by Tension Loading (Metal-to-Metal) |
|
| D2395 |
Standard Test Methods for Specific Gravity of Wood
and Wood-based Materials |
|
| D2523 |
Standard Practice for Testing Load-Strain Properties
of Roofing Membranes |
|
| D2559 |
Standard Test for Adhesives for Structural Laminated
Wood Products for Use Under Exterior (Wet Use) Exposure
Conditions |
|
| D2718 |
Test Methods for Structural Panels in Planar (Rolling
Shear) |
|
| D2842 |
Standard Test Methods for Water Absorption of Rigid
Cellular Plastics |
|
| D2990 |
Standard Test Methods for Tensile, Compressive,
and Flexural Creep and Creep-Rupture of Plastics |
|
| D2991 |
Standard Test Methods for Stress Relaxation of
Plastics |
|
| D3024 |
Standard Specification for Protein-Base Adhesives
for Structural Laminated Wood Produces for Use Under
Interior (Dry Use) Exposure Conditions |
|
| D3043 |
Standard Methods of Testing Structural Panels in
Flexure |
|
| D3044 |
Standard Test Methods for Shear Modulus of Wood-Based
Structural Panels |
|
| D3535 |
Standard Test Methods for Resistance to Deformation
Under Static Loading for Structural Wood Laminated
Adhesives Used Under Exterior (West Use) Exposure
Conditions |
|
| D3679 |
Standard Specification for Rigid Poly (Vinyl Chloride)
(PVC) Siding |
|
| D3930 |
Standard Specification for Adhesives for Wood-Based
Materials for Construction of Manufactured Homes |
|
| D4317 |
Standard Specification for Polyvinyl
Acetate-Based Emulsion Adhesives |
|
| D4442 |
Standard Test Methods for Direct Moisture Content
Measurement of Wood and Wood-Base Materials |
|
| D5206 |
Standard Test Methods for Windload Resistance of
Rigid Poly (Vinyl Chloride) (PVC) Siding |
|
| D2837 |
Standard Test Methods for Obtaining Hydrostatic
Design Basis for Thermoplastic Pipe Materials |
|
| D6108 |
Standard Test Methods for Compressive Properties
of Plastic Lumber and Shapes |
|
| D6109 |
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastic Lumber |
|
| D6111 |
Standard Test Method for Bulk Density and Specific
Gravity of Plastic Lumber and Shapes by Displacement |
|
| D6112 |
Standard Test Methods for Compressive and Flexural
Creep and Creep-Rupture of Plastic Lumber and Shapes |
|
| D6117 |
Standard Test Methods for Mechanical Fasteners
in Plastic Lumber and Shapes |
|
| D6341 |
Standard Test Methods for Determination of the
Linear Coefficient of Thermal Expansion of Plastic
Lumber and Plastic Lumber Shapes Between -30 and
140 degrees F (-34.4 and 60 degrees C) |
|
| D6435 |
Standard Test Methods for Shear Properties of Plastic
Lumber and Plastic Lumber Shapes |
|
| E72 |
Standard Test Methods of Conducting Strength Tests
of Panels for Building Construction |
|
| E73 |
Standard Methods of Testing Truss Assemblies |
|
| E96 |
Standard Test Methods for Water Vapor Transmission
of Materials (perm rating of materials) |
|
| E196 |
Standard Practice for Gravity Load Testing of Floors
and Flat Roofs |
|
| E283 |
Test Methods for Rate of Air Leakage Through Exterior
Windows, Curtain Walls, and Doors Under Specified
Air Pressure Difference |
|
| E 330 |
Standard Test Methods for Structural Performance
of Exterior Windows, Curtain Walls, and Doors by
Uniform Static Air Pressure Difference |
|
| E529 |
Standard Guide for Conducting Flexural Tests on
Beams and Girders for Building Construction |
|
| E564 |
Standard Practice for Static Load Test for Shear
Resistance of Framed Walls for Buildings |
|
| E661 |
Test Methods for Performance of Wood and Wood-Based
Floor and Roof Sheathing Under Concentrated Static
and Impact Loads |
|
| E767 |
Standard Test Methods for Shear Strength Properties
of Metal Connector Plates |
|
| E779 |
Standard Test Methods for Determining Air Leakage
Rate by Fan Pressurization |
|
| E2127 |
Standard Methods of Static Load Test for Combined
Tensile and Transverse Load Resistance of Paneled
Wall Systems in Building Construction |
|
| F462 |
Standard Consumer Safety Specification for Slip-Resistant
Bathing Facilities |
|
| F1667 |
Standard Specification for Driven: Nails,
Spikes, and Staples |
|
| F1678 |
Standard Test Methods for Using a Portable Articulated
Strut Slip Tester (PAST) |
