| C273 |
Standard Test Method for Shear Properties of Sandwich
Core Materials |
|
| C393 |
Standard Test Method for Flexural Properties of
Sandwich Constructions |
|
| D412 |
Standard Test Methods for Vulcanized Rubber and
Thermoplastic Rubbers and Thermoplastic Elastomers |
|
| D570 |
Standard Test Method for Water Absorption of Plastics |
|
| D572 |
Standard Test Method for Rubber-Deterioration by
Heat and Oxygen |
|
| D573 |
Standard Test Method for Rubber--Deterioration
in an Air Oven |
|
| D624 |
Standard Test Method for Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic Elastomers |
|
| D638 |
Standard Test Method for the Tensile Properties
of Plastics |
|
| D648 |
Standard Test Methods for Deflection Temperature
of Plastics Under Flexural Load in the Edgewise Position |
|
| D695 |
Standard Test Method for Compressive Properties
of Rigid Plastics |
|
| D696 |
Standard Test Method for Coefficient of Linear
Thermal Expansion of Plastics Between -30 deg. C
and 30 deg. with a Vitreous Silica Dilatometer |
|
| D781 |
Standard Test Methods for Puncture and Stiffness
of Paperboard, and Corrugated and Solid Fiberboard |
|
| D790 |
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials |
|
| D792 |
Standard Test Methods for Density and Specific
Gravity (Relative Density) of Plastics by Displacement |
|
| D882 |
Standard Test Methods for Tensile Properties of
Thin Plastic Sheeting |
|
| D1621 |
Standard Test Method for Compressive Properties
of Rigid Cellular Plastics |
|
| D1622 |
Standard Test Method for Apparent Density of Rigid
Cellular Plastics |
|
| D1623 |
Standard Test Method for Tensile and Tensile Adhesion
Properties of Cellular Plastics |
|
| D1761 |
Standard Test Methods for Mechanical Fasteners
in Wood |
|
| D2240 |
Standard Test Method for Rubber Property--Durometer
Hardness |
|
| D2523 |
Standard Practice for Testing Load-Strain Properties
of Roofing Membranes |
|
| D2837 |
Standard Test Method for Obtaining Hydrostatic
Design Basis for Thermoplastic Pipe Materials |
|
|
| D2842 |
Standard Test Method for Water Absorption of Rigid
Cellular Plastics |
|
| D2990 |
Standard Test Methods for Tensile, Compressive,
and Flexural Creep and Creep-Rupture of Plastics |
|
| D2991 |
Standard Test Methods for Stress Relaxation of
Plastics |
|
| D3679 |
Standard Specification for Rigid Poly (Vinyl Chloride)
(PVC) Siding |
|
| D5206 |
Standard Test Method for Windload Resistance of
Rigid Poly (Vinyl Chloride) (PVC) Siding |
|
| D6108 |
Standard Test Method for Compressive Properties
of Plastic Lumber and Shapes |
|
| D6109 |
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastic Lumber |
|
| D6111 |
Standard Test Method for Bulk Density and Specific
Gravity of Plastic Lumber and Shapes by Displacement |
|
| D6112 |
Standard Test Methods for Compressive and Flexural
Creep and Creep-Rupture of Plastic Lumber and Shapes |
|
| D6117 |
Standard Test Methods for Mechanical Fasteners
in Plastic Lumber and Shapes |
|
| D6341 |
Standard Test Method for Determination of the Linear
Coefficient of Thermal Expansion of Plastic Lumber
and Plastic Lumber Shapes Between -30 and 140 degrees
F (-34.4 and 60 degrees C) |
|
| D6435 |
Standard Test Method for Shear Properties of Plastic
Lumber and Plastic Lumber Shapes |
|
| E96 |
Standard Test Methods for Water Vapor Transmission
of Materials |
|
FMHCSS
24CFR
§3280.305 (g)(5) |
Bottom Board Puncture Resistance Test (Beach Puncture
Test) |
|
FMHCSS
24CFR
§3280.401 |
Vinyl Siding Negative Wind Ultimate Pressure Test |
